Loading ...
Loading ...
Loading ...
Audio system
265
✽✽
NOTICE - Using the iPod
®
Devices
• To use the audio system’s iPod
®
control function, use the dedicated
cable provided with your iPod
®
.
• Connecting the iPod
®
to the vehi-
cle during play may result in a
loud noise that lasts about one to
two seconds. Connect the iPod
®
to
the vehicle after stopping or paus-
ing play.
• Connect the iPod
®
with the vehicle
in the ACC ON state to begin
charging.
• When connecting the iPod
®
cable,
be sure to fully push the cable into
the port.
• When EQ effects are enabled
simultaneously on external
devices, such as iPod
®
s and the
audio system, the EQ effects may
overlap, causing sound quality
deterioration or distortion.
Deactivate the EQ function for all
external devices, if possible.
• Noise may occur when your iPod
®
or the AUX port is connected.
Disconnect and store separately
when not in use.
(Continued)
(Continued)
• There may be noise if the audio
system is used with an iPod
®
or
AUX external device connected to
the power jack. In these cases, dis-
connect the iPod
®
or external
device from the power jack.
• Play may be interrupted, or device
malfunctions may occur depend-
ing on the characteristics of your
iPod
®
/iPhone
®
.
• Play may fail if your iPhone
®
is
connected through both Bluetooth
®
Wireless Technology and USB. In
this case, select Dock connector or
Bluetooth
®
Wireless Technology
on your iPhone
®
to change the
sound output settings.
• If your software version does not
support the communication proto-
col or your iPod
®
is not recognized
due to device failure, anomalies or
defects, iPod
®
mode cannot be
used.
• iPod
®
nano (5th generation)
devices may not be recognized if
the battery is low. Charge suffi-
ciently before use.
(Continued)
(Continued)
• The search and song play order in
the iPod
®
device may be different
from the search order in the audio
system.
• If the iPod
®
has failed due to an
internal defect, please reset the
iPod
®
(consult your iPod
®
manu-
al).
• Depending on the software ver-
sion, the iPod
®
may fail to sync
with the system. If the media is
removed or disconnected before
recognition, the previous mode
may not be restored (iPad
®
cannot
be charged).
• Cables other than the 1-meter
cable provided with iPod
®
/iPhone
®
products may not be recognized.
• When other music apps are used
on your iPod
®
, the system sync
function may fail due to malfunc-
tion of the iPod
®
application.
Loading ...
Loading ...
Loading ...