Loading ...
Loading ...
Loading ...
2. Establish the drive-ready state for the
vehicle to be started as usual.
If the first starting attempt is not suc-
cessful, wait a few minutes before mak-
ing another attempt in order to allow the
discharged battery to recharge.
3. Disconnect the jumper cables in the re-
verse order.
Check the battery and recharge, if needed.
Tow-starting and towing
Transporting the vehicle
General information
The vehicle is not permitted to be towed.
Safety information
NOTICE
The vehicle can be damaged when towing
the vehicle with a single lifted axle. There
is a risk of damage to property. The vehi-
cle should only be transported on a loading
platform.
Pushing the vehicle
To remove a broken-down vehicle from the
danger area, push it for a short distance at a
speed of no more than 6 mph/10 km/h.
For rolling or pushing the vehicle, refer to
page 129.
Tow truck
The vehicle should only be transported on a
loading platform.
NOTICE
The vehicle can become damaged when
lifting and securing it.
There is a risk of damage to property.
– Lift the vehicle using suitable means.
– Do not lift or secure the vehicle by its
tow fitting, body parts, or suspension
parts.
Towing other vehicles
General information
Switch on the hazard warning system, de-
pending on local regulations.
If the electrical system has failed, clearly
identify the vehicle being towed by placing
a sign or a warning triangle in the rear win-
dow.
Safety information
Warning
If the approved gross vehicle weight of the
towing vehicle is lighter than the vehicle
to be towed, the tow fitting can tear off or
it will not be possible to control the vehi-
cle's response. There is a risk of accident.
Make sure that the gross vehicle weight of
Seite 305
Breakdown assistance MOBILITY
305
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...