Loading ...
Loading ...
Loading ...
– Pedestrians having a body size less than
32 in/80 cm.
Functional limitations
The system may not be fully functional or
may not be available in the following situa-
tions:
– In heavy fog, wet conditions, or snow-
fall.
– In tight curves.
– If the field of view of the camera or the
windshield is dirty or covered.
– If the driving stability control systems
are deactivated, for instance DSC OFF.
– Up to 10 seconds after the start of the
engine via the Start/Stop button.
– During calibration of the camera imme-
diately after vehicle delivery.
– If there are constant blinding effects be-
cause of oncoming light, for instance
from the sun low in the sky.
– When it is dark outside.
Brake force display
Concept
Additional brake lights indicate emergency
braking to the traffic behind. This can re-
duce the risk of a rear-end collision.
General information
– During normal brake application, the
brake lights light up.
– During heavy brake application, the
flashers additionally light up.
Fatigue alert
Concept
The system can detect decreasing alertness
or fatigue of the driver during long, monoto-
nous trips, for instance on highways. In this
situation, it is recommended that the driver
takes a break.
Safety information
Warning
The system cannot serve as a substitute
for the driver’s personal judgment in as-
sessing one's physical state. An increasing
lack of alertness or fatigue may not be de-
tected or not be detected in time. There is
a risk of accident. Make sure that the
driver is rested and alert. Adjust driving
style to traffic conditions.
Function
The system is switched on each time the en-
gine is started and cannot be switched off.
Seite 180
CONTROLS Safety
180
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...