Loading ...
Loading ...
Loading ...
Press the latches together, arrows 1, and
remove the bulb holder.
4. Remove the bulb holder from the open-
ing.
5. Press the nonworking bulb gently into
the socket, turn counterclockwise and
remove.
– Arrow 1: brake lights/tail lights
– Arrow 2: turn signal
– Arrow 3: reversing light
6. Proceed in the reverse order to insert
the new bulb and attach the bulb holder.
Make sure that the bulb holder engages
in all fasteners.
Central brake light and license plate
lights
Follow the general instructions on lights
and bulbs, refer to page 292.
The lights feature LED technology. In the
case of a malfunction, contact a dealer's
service center or another qualified service
center or repair shop.
Side turn signal, bulb replacement
Follow the general instructions on lights
and bulbs, refer to page 292.
Bulb: WY5W.
1. Push the side turn signal forward in the
driving direction, arrow 1, and swing it
outward, arrow 2.
2.
– On the left facing the driving direc-
tion: turn the bulb holder clockwise
and remove.
– On the right facing the driving direc-
tion: turn the bulb holder counter-
clockwise and remove.
3. Replace the bulb.
4. Insert the bulb holder.
5. Insert the rear side turn signal, arrow 1,
and swing it forward, arrow 2.
Vehicle battery
General information
The battery is maintenance-free.
Seite 298
MOBILITY Replacing components
298
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...