Loading ...
Loading ...
Loading ...
Driving
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with
the series. It also describes features and
functions that are not necessarily available
in your vehicle, e.g., due to the selected op-
tions or country versions. This also applies
to safety-related functions and systems.
When using these functions and systems,
the applicable laws and regulations must be
observed.
Start/Stop button, drive-ready
state
Concept
The following ready states can
be attained by pressing the
Start/Stop button:
– Radio-ready state on/off.
– Ignition on/off.
– Activate/deactivate drive-ready state.
To activate drive-ready state, you need to
press the brake pedal at the same time.
The drive-ready state cannot be activated as
long as the charging cable, refer to
page 250, is connected.
Switching radio-ready state on/off
The radio-ready state is activated by press-
ing the Start/Stop button in the following
situations:
– When the engine is running.
– When drive-ready state is activated.
– When the engine is switched off auto-
matically using the Auto Start/Stop
function.
Some electronic systems/power consumers
remain ready for operation.
Radio-ready state is switched off automati-
cally:
– If the driver's or front passenger door is
opened when exiting the vehicle, with
drive-ready state switched off manually.
– If the ignition is switched off manually
with the Start/Stop button.
– After approx. 8 minutes.
– When the vehicle is locked using the
central locking system.
– Shortly before the battery is discharged
completely, so that the engine can still
be started.
If the engine is switched off and the igni-
tion is switched on, the system automati-
cally switches to the radio-ready state if the
lights are switched off or, if correspondingly
equipped, the daytime running lights are
switched on.
Ignition on
Press the Start/Stop button, but do not
press on the brake pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator/warning lights in the
instrument cluster light up for a varied
length of time.
To save battery power when the engine is
off, switch off the ignition and any unneces-
sary electronic systems/power consumers.
Ignition off
Press the Start/Stop button again without
stepping on the brake.
Seite 110
CONTROLS Driving
110
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...