Loading ...
Loading ...
Loading ...
Charging process is interrupted.
3. Remove the charging cable from the
charging socket, arrow 2.
4. Put the charging socket lid back on.
5. Press on the charging socket flap until it
engages.
6. Attach cover of the charging cable plug,
if needed.
7. Disconnect Level 1 charging cable from
the household socket or Level 2 charg-
ing cable from the port on the charging
station as applicable.
8. Stow the charging cable.
At a charging station, insert the perma-
nently installed charging cable in the
place provided for it.
Refueling
Venting the tank
Excess pressure may build up in the fuel
tank as a result of gasoline vapors; this
pressure is dissipated before the fuel cap is
opened.
The switch is located in the storage com-
partment of the driver's door.
1. Switch off drive-ready state.
2. Pull the switch to start the pres-
sure equalization.
The tank venting status is displayed in
the instrument cluster. In rare cases,
tank venting can last several minutes.
When tank venting has finished, a mes-
sage is displayed in the instrument clus-
ter. The fuel filler flap is released for
opening.
3. Open the fuel filler flap.
If it is not possible to open the fuel filler
flap after tank venting, press the button
again.
If it is still not possible to open the fuel
filler flap even after pressing the button
again, unlock the fuel filler flap man-
ually.
Fuel cap
1. To open the fuel filler flap, press on the
rear edge, arrow. The fuel filler flap
opens.
2. Turn the fuel cap counterclockwise.
3. Place the fuel cap in the bracket at-
tached to the fuel filler flap.
Gasoline
For the best fuel efficiency, the gasoline
should be sulfur-free or very low in sulfur
content.
Refuel only with unleaded gasoline without
metallic additives.
Information on the recommended fuel grade
can be found in the Owner's Manual.
Seite 30
QUICK REFERENCE On the road
30
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...