Loading ...
Loading ...
Loading ...
Things to remember when driving
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with
the series. It also describes features and
functions that are not necessarily available
in your vehicle, e.g., due to the selected op-
tions or country versions. This also applies
to safety-related functions and systems.
When using these functions and systems,
the applicable laws and regulations must be
observed.
Breaking-in period
General information
Moving parts need to begin working to-
gether smoothly.
The following instructions will help you to
achieve a long vehicle life and good effi-
ciency.
Safety information
Warning
Due to new parts and components, safety
and driver assistance systems can react
with a delay. There is a risk of accident.
After installing new parts or with a new
vehicle, drive conservatively and inter-
vene early if necessary. Observe the break-
in procedures of the respective parts and
components.
Engine, transmission, and axle
drive
Up to 1,200 miles/2,000 km
Do not exceed the maximum engine and
road speed:
– For gasoline engine 4,500 rpm and
100 mph/160 km/h.
Avoid full load or kickdown under all cir-
cumstances.
From 1,200 miles/2,000 km
The engine and vehicle speed can gradually
be increased.
Tires
Tire traction is not optimal due to manufac-
turing circumstances when tires are brand-
new; they achieve their full traction poten-
tial after a break-in time.
Drive conservatively for the first
200 miles/300 km.
Brake system
Brake discs and brake pads only reach their
full effectiveness after ap-
prox. 300 miles/500 km. Drive moderately
during this break-in period.
Following part replacement
The same break-in procedures should be ob-
served if any of the components mentioned
above have to be renewed in the course of
the vehicle's operating life.
Seite 238
DRIVING TIPS Things to remember when driving
238
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...