Loading ...
Loading ...
Loading ...
Charging cable is unlocked.
2. Press the release button on the handle,
arrow 1, and grasp the charging cable at
the gripping areas.
Charging process is interrupted.
3. Remove the charging cable from the
charging socket, arrow 2.
4. Put the charging socket lid back on.
5. Press on the charging socket flap until it
engages.
6. Attach cover of the charging cable plug,
if needed.
7. Disconnect Level 1 charging cable from
the household socket or Level 2 charg-
ing cable from the port on the charging
station as applicable.
8. Stow the charging cable.
At a charging station, insert the perma-
nently installed charging cable in the
place provided for it.
Emergency unlocking
The charging cable is locked when the vehi-
cle is locked and during the charging proc-
ess.
In case of an electrical malfunction, the
charging cable can be manually unlocked.
1. Open the hood.
2. Pull the knob, arrow.
The charging cable is manually un-
locked.
3. For removing the charging cable, refer
to page 251.
Have the locking system of the charging
socket checked at the dealer’s service cen-
ter or another qualified service center or re-
pair shop after emergency unlocking of the
charging cable.
Charging process
General information
At high temperatures, the high-voltage bat-
tery is initially cooled. There may be a delay
before charging starts. If the high-voltage
battery is discharged, cooling of the high-
voltage battery may not be possible. The
charging process cannot be started.
If the Level 1 charging cable is exposed to
high temperatures and direct sunlight, this
may interrupt the charging process. Charg-
ing will resume automatically.
The charging process may take longer under
extremely low or high temperatures.
Seite 252
MOBILITY Charging the vehicle
252
Online Edition for Part no. 01405A02CC9 - II/20
Loading ...
Loading ...
Loading ...