Loading ...
Loading ...
Loading ...
10 BISSELL.com
WARNING To reduce the risk of fire, turn Robotic Vacuum Power Switch OFF before performing maintenance or
troubleshooting checks.
Maintaining the Brush Roll
Check out the BISSELL Connect App for tips and videos on Brush Roll Maintenance.
1. Turn power OFF, remove the
robot from the dock and put it
upside down on a soft surface.
2. Use a Phillips-head
screwdriver to remove the
3 screws on the sole plate.
Rotate the sole plate and lift
it out.
3. Look for damage on the
sole plate rollers and flexible
wiper. Make sure they’re all
rotating freely. Replace if
necessary.
4. Pull up on the plastic
endcap to remove the brush.
Clean it and make sure the
plastic end rotates freely.
5. Check right side drive gear
to remove any hair build up.
6. Replace Brush Roll.
7. Holding the sole plate at
a slight angle in front of the
robot, align the slots in sole
plate with the tabs, then rotate
the sole plate into place.
8. Replace the screws and
don’t overtighten. Compress
the bumper several times to
ensure smooth operation.
Loading ...
Loading ...