Loading ...
Loading ...
Loading ...
15
OPERATING
Inserting the Portafilter
Place the portafilter underneath the group
head so that the handle is aligned with
the INSERT position. Insert the portafilter
into the group head and rotate the handle
towards the center until resistance is felt.
LOCK
INSERT
Preset Shot Volume - 1 CUP button
Press the 1 CUP button once to extract a
single shot of espresso at the preset volume
(approx. 1oz / 30ml). The extraction will
start using the low pressure pre-infusion
(see page 16). The machine will stop after
the preset volume has been extracted.
PROGRAM
NOTE
The amount of espresso extracted in
the cup will vary depending on your
grind size and grind amount settings.
NOTE
Pressing the 1 CUP or 2 CUP button
during a preset shot volume will
immediately stop the extraction.
Preset Shot Volume - 2 CUP button
Press the 2 CUP button once to extract
a double shot of espresso at the preset
volume (approx. 2oz / 60ml). The
extraction will start using the low pressure
pre-infusion (see page 16). The machine
will stop after the preset volume has
been extracted.
PROGRAM
Re-Programming
Shot Volume - 1 CUP Button
1. To begin programming, press the
PROGRAM button once. The machine
will beep once and the PROGRAM
button will begin to flash. This indicates
the machine is in programming mode.
2. Press 1 CUP button to start espresso
extraction. Press 1 CUP button again
once desired volume of espresso has
been extracted. The machine will
beep twice to indicate the new 1 CUP
volume has been set.
Re-Programming
Shot Volume - 2 CUP Button
1. To begin programming, press the
PROGRAM button once. The machine
will beep once and the PROGRAM
button will begin to flash. This indicates
the machine is in programming mode.
2. Press 2 CUP button to start espresso
extraction. Press 2 CUP button again
once desired volume of espresso has
been extracted. The machine will
beep twice to indicate the new
2 CUP volume has been set.
Loading ...
Loading ...
Loading ...