Loading ...
Loading ...
Loading ...
02 Locks and alarm
Remote key and key blade
02
}}
* Option/accessory, for more information, see Introduction.
61
Unlocking the driver's door with the
detached key blade
Driver's door keyhole cover
If the remote key/PCC* does not function nor-
mally (weak battery, etc.), the vehicle can be
unlocked with the detachable key blade.
1. Remove the key blade from the remote
key/PCC (see the previous section,
"Removing the key blade" on page 60 for
instructions).
2. Press the key blade approx. 0.5 in. (1 cm)
straight up in the hole on the underside of
the keyhole cover.
> The cover will come off due to the
pressure exerted when the key blade is
pushed upward.
3. Insert the key blade as far as possible in
the driver's door lock. Turn the key blade
to unlock the driver's door. This will trig-
ger the alarm.
4. To turn off the alarm, insert the remote
key in the ignition slot. This also applies
to vehicles equipped with the optional
keyless drive.
5. Press the cover back into place after the
door has been unlocked.
Replacing batteries in the remote
key/PCC
The battery/batteries in the remote key/PCC
should be replaced if:
•
The information symbol lights up and a
text appears in the information display.
and/or
•
the vehicle's locks repeatedly do not
react when a button on the remote
key/PCC is pressed within approximately
60 ft (20 m) from the vehicle.
Battery type CR 2430, 3 V (one battery in the
remote key, two batteries in the PCC)
Loading ...
Loading ...
Loading ...