Loading ...
Loading ...
Loading ...
09 Maintenance and specifications
Replacing bulbs
09
333
Extra high beam
1
1. Remove the headlight housing from the
vehicle (see page 330).
2. Remove the cover over the bulbs (see
page 331).
3. Remove the bulb by turning it counter-
clockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and
turn it clockwise to put it in place. It can
only be secured in one position.
6. Put the cover back into position and rein-
stall the headlight housing.
Turn signals
1. Remove the headlight housing from the
vehicle (see page 330).
2. Remove the cover by pulling it straight
out.
3. Pull the holder to access the bulb.
4. Press in the bulb and turn it to remove it
from the holder.
5. Press and turn the new bulb into place.
6. Reinsert the bulb holder into the headlight
housing.
7. Put the cover back into position and rein-
stall the headlight housing.
Taillight housing
The bulbs in the taillight cluster are replaced
from inside the trunk (not the LED functions).
NOTE
Before starting to replace a bulb, see
page 330.
1. Remove the covers in the left/right panel
to access the bulb holder.
2. Press the catches together and pull out
the bulb holder.
3. Remove the defective bulb by pressing it
in slightly and it turning counterclockwise
before pulling it out.
1
Models with optional Active Bending Lights only.
Loading ...
Loading ...
Loading ...