Loading ...
Loading ...
Loading ...
03 Your driving environment
Lighting
03
* Option/accessory, for more information, see Introduction.
99
Tunnel detection (models with the rain
sensor* only)
The rain sensor reacts to the change in light-
ing conditions when, for example, the vehicle
enters a tunnel and the tunnel detection fea-
ture will then activate the low beam head-
lights. The low beams will be switched off
approx. 20 seconds after the vehicle leaves
the tunnel.
The rain sensor does not have to be activated
for tunnel detection to function.
Active Bending Lights (ABL)*
Headlight pattern with the Active Bending Light
function deactivated (left) and activated (right)
When this function is activated, the headlight
beams adjust laterally to help light up a curve
according to movements of the steering
wheel (see the right-pointing beam in the
illustration).
ABL is activated automatically
2
when the
engine is started.
The function can be deactivated/reactivated
in the MY CAR menu system under
My S60
Active Bending Lights or under Settings
Car settings Light settings Active
Bending Lights
.
See page 197 for a description of the menu
system.
NOTE
This function is only active in twilight or
dark conditions, and only when the vehicle
is in motion.
If a fault should occur in the system, the sym-
bol will illuminate and a message will be dis-
played as shown in the table.
Symbol Display Explanation
Headlamp
failure
Service
required
The system is
not functioning
properly and
should be
inspected/
repaired by a
trained and
qualified Volvo
service techni-
cian.
Cornering lights
Models equipped with ABL also have front
cornering lights that temporarily provide extra
light to the front left or right of the vehicle at
low speeds when making a sharp turn (for
example, when turning into a parking space)
or when the turn signals are used.
This feature is activated when:
•
High or low beam headlights are on
and
•
The vehicle's speed is below
20 mph (30 km/h)
The feature is also activated when the vehicle
is backing up.
2
The factory default setting is on.
Loading ...
Loading ...
Loading ...