Loading ...
Loading ...
Loading ...
03 Your driving environment
Lighting
03
101
light in the button illuminate when the
rear fog lights are switched on.
NOTE
The rear fog lights are considerably
brighter than the normal taillights and
should be used only when conditions such
as fog, rain, snow, smoke or dust reduce
visibility for other vehicles to less than
500 ft. (150 meters).
NOTE
Condensation may form temporarily on the
inside of the lenses of exterior lights such
as headlights, fog lights, or taillights. This
is normal and the lights are designed to
withstand moisture. Normally, condensa-
tion will dissipate after the lights have been
on for a short time.
Hazard warning flashers
Location of the hazard warning flasher button
The hazard warning flasher should be used to
indicate that the vehicle has become a traffic
hazard.
– To activate the flashers, press the button
in the center dash. Press the button again
to turn off the flashers.
NOTE
•
Regulations regarding the use of the
hazard warning flasher may vary,
depending on where you live.
•
The hazard warning flashers will be
activated automatically if an airbag
deploys.
Turn signals
Turn signals
When changing lanes
The driver can automatically flash the turn
signals 3 times by moving the turn signal
lever up or down to the first position and
releasing it.
When turning
Move the lever as far up or down as pos-
sible to start the turn signals. The turn signals
will be cancelled automatically by the move-
ment of the steering wheel, or the lever can
be returned to its initial position by hand.
Loading ...
Loading ...
Loading ...