Loading ...
Loading ...
Loading ...
02 Locks and alarm
Remote key and key blade
02
60
* Option/accessory, for more information, see Introduction.
or unlock the vehicle will show the vehicle's
most recently received status. The indicator
lights will not flash when the information but-
ton is pressed while the PCC is out of range.
If more than one PCC is used to lock/unlock
the vehicle, only the one used most recently
will show the correct locking status.
NOTE
If none of the indicator lights illuminate
when the information button is pressed,
this may be because the most recent
transmission between the vehicle and the
PCC was interrupted or impeded by build-
ings or other objects.
Keyless drive
Vehicles equipped with the optional Personal
Car Communicator have the keyless drive
function, see page 64 for detailed informa-
tion.
Detachable key blade
The key blade can be removed from the
remote key. When removed, the key blade
can be used to:
•
Lock/unlock the driver's door if the
remote key is not functioning properly
•
Lock/unlock the glove compartment (see
page 69)
•
Override the transmission's shiftlock sys-
tem (see page 126)
•
Enable/disable the valet locking function
(see page 63)
•
The front passenger's door and the rear
side doors can be locked manually if nec-
essary (see page 67)
•
The trunk can be opened manually if nec-
essary (see page 70)
Removing the key blade
Slide the spring loaded catch to the side.
Pull the key blade straight out of the
remote key.
Reinserting the key blade in the remote
key
1. Hold the remote key with the slot for the
key blade up.
2. Carefully slide the key blade into its
groove.
3. Gently press the key blade in the groove
until it clicks into place.
Loading ...
Loading ...
Loading ...