Loading ...
Loading ...
Loading ...
02 Locks and alarm
Remote key and key blade
02
56
•
To activate visual confirmation: go to
Settings Car settings Light
settings
and select Door lock
confirmation light and/or Unlock
confirmation light by pressing OK/
MENU.
•
To activate audible confirmation: go to
Settings Car settings Lock
settings
and select Audible
confirmation by pressing OK/MENU.
See page 197 for a description of the menu
system.
Lock indicator
Lock/alarm indicator light
A flashing indicator light at the base of the
windshield verifies that the vehicle is locked.
Immobilizer (start inhibitor)
Each of the keys supplied with your vehicle
contains a coded transponder. The code in
the key is transmitted to an antenna in the
ignition slot where it is compared to the code
stored in the start inhibitor module. The vehi-
cle will start only with a properly coded key. If
you misplace a key, take the other keys to a
trained and qualified Volvo service technician
for reprogramming as an anti-theft measure.
The following messages (which may appear
in the instrument panel display) are related to
the immobilizer:
Message Meaning
Insert car
key
Remote key not recognized
during start. Try to start the
vehicle again.
Car key
not found
PCC with keyless drive only.
Remote key not recognized
during start. Try to start the
vehicle again.
If the problem continues,
insert the remote key into
the ignition slot and try to
start the vehicle again.
Immobil-
izer Try
start
again
Remote key fault during
start. Contact an authorized
Volvo workshop.
CAUTION
Never use force when inserting the remote
key in the ignition slot. The vehicle cannot
be started if the transponder is damaged.
USA–FCC ID: LTQWFS 125VO
This device complies with part 15 of the FCC
rules. Operation is subject to the following
condition: (1) This device may not cause
harmful interference, and (2) this device must
Loading ...
Loading ...
Loading ...