Loading ...
Loading ...
Loading ...
en Home Connect
28
Activating remote start
1. Touch the # touch button to switch on the
appliance.
2. Touch the 0 touch button.
The main menu appears.
3. Use the ( or ) button to select "Remote start" F.
4. Press the & button to activate remote start.
F appears in the display.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
Note: You will find the Home Connect settings in the
basic settings for your appliance. Which settings the
display shows will depend on whether Home Connect
has been set up and whether the appliance is
connected to your home network.
Remote diagnostics
If a fault occurs, the after-sales service can use remote
diagnostics to access your appliance.
Contact the after-sales service, making sure that your
appliance is connected to the Home Connect server
and checking that the remote diagnostics service is
available in your country.
Note: For more information and to check whether the
remote diagnostics service is available in your country,
please visit the Help & Support area of the Home
Connect website for your country: www.home-
connect.com
About data protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
■ Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
■ Security certificate of the WiFi communication
module (to ensure a secure IT connection).
■ The current software and hardware version of your
domestic appliance.
■ Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note: Ensure that the Home Connect functions can be
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Declaration of Conformity
Constructa Neff Vertriebs-GmbH hereby declares that
the appliance with functionality meets the basic
requirements and other relevant provisions of Directive
2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.neff-international.com among the
additional documents on the product page for your
appliance.
2.4 GHz band: max. 100 mW
5 GHz band: max. 100 mW
Basic setting Possible settings Explanation
Wi-Fi Switching on/off You can switch the radio module on and off. If Wi-Fi has been
activated, you can use the Home Connect functions.
In networked standby mode, the appliance requires max. 2 W.
Network Connecting to the
network/disconnecting
from the network
Switch the network connection on or off as required (e.g. for holiday).
The network information is retained after the appliance is switched off.
After switching on the appliance, wait for a few seconds while it
reconnects to the network.
Connect to app Start the connection process between the app and the appliance.
Remote control On/off Access the appliance's functions via the Home Connect app.
When deactivated, only the appliance's operating statuses will be
displayed in the app.
Appliance
information !
The display shows the network and appliance information.
y
BE BG CZ DK DE EE IE EL
ES FR HR IT CY LV LT LU
HU MT NL AT PL PT RO SI
SK FI SE UK NO CH TR
5 GHz Wi-Fi: for indoor use only
Loading ...
Loading ...
Loading ...