Loading ...
Loading ...
Loading ...
140
Lower the vehicle completely by folding
the jack, then remove the jack.
Tighten the bolts again using the wheelbrace,
tighten them fully without forcing them.
Place the wheel to be repaired in the carrier.
Secure the carrier on the hook then
raise the carrier using the bolt and the
wheelbrace.
Remember to close the flap, located on
the sill.
Store the trim in the vehicle.
Never go underneath a vehicle that is
supported only by a jack (use a ramp).
Never use a screwdriver in place of the
wheelbrace.
5. Fitting the spare wheel
Position the wheel on the hub and start
tightening the bolts by hand.
Carry out an initial tightening of the bolts
using the wheelbrace.
Changing a wheel
Loading ...
Loading ...
Loading ...