Loading ...
Loading ...
Loading ...
12
KEY
This locks and unlocks the locks on the
vehicle and starts the engine.
REMOTE CONTROL
Changing the battery
Battery ref.: CR1620/3 volts.
The information "battery flat" is given by an
audible signal, accompanied by a message
on the multifunction display.
To replace the battery, unclip the casing
using a coin at the ring. If the remote control
does not work after the battery has been
changed, re-programme the remote control.
There is a risk of damage if the replacement
battery does not conform.
ELECTRONIC IMMOBILISER
All of the keys contain an electronic
immobiliser device.
This device locks the engine supply system.
It is activated automatically when the key is
removed from the ignition.
After the ignition is switched on, a dialogue
is established between the key and the
electronic immobiliser system.
The metal part of the key must be unfolded
correctly for correct dialogue to take place.
Good practice
Make a careful note of the number of the
keys. If they are lost, your PEUGEOT dealer
will be able to carry out his work more
quickly and effectively if you give him this
number and the confidential card.
Do not make any modifications to the
electronic immobiliser system.
Programming
the remote control
Following changing of the remote control
battery or disconnection of the vehicle
battery, the remote control must be
reprogrammed.
- Wait at least one minute before using the
remote control.
- Switch on the ignition.
- Press one of the two padlocks for at least
five seconds within the next ten seconds.
- Switch off the ignition.
- Wait at least one minute before using the
remote control.
The remote control is now working again.
Use only identical batteries or batteries of an
equivalent type to those recommended by a
PEUGEOT dealer.
Do not discard the remote control batteries,
they contain metals which are harmful to the
environment.
Deposit them at a PEUGEOT dealership, or
at any other approved collection point.
Accesses
Loading ...
Loading ...
Loading ...