Loading ...
Loading ...
Loading ...
3
97
06 TRIP COMPUTER
Each press of the button, located at the end of the
wipers stalk, permits displaying of the different trip
computer data in succession, depending on the display.
- the "Current info" with:
• the range,
• the current consumption,
• the distance remaining to the
destination,
- "Route 1" with:
• the distance travelled,
• the average consumption,
• the average speed,
- "Route 2" with the same
characteristics for a second
route.
A few definitions
Range: Displays the distance which can be travelled with the remaining fuel
detected in the tank, in relation to the average consumption over the last few miles
(kilometres).
This displayed value may vary significantly following a change in the vehicle
speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed. After filling with
at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds
60 miles (100 km).
If, whilst driving, dashes are displayed continuously in place of digits, contact a
PEUGEOT dealer.
Current consumption: only calculated and displayed above 20 mph (30 km/h).
Average consumption: this is the average quantity of fuel consumed since the last
trip recorder zero reset.
Distance travelled: calculated since the last trip computer zero reset.
Distance remaining to the destination: calculated with reference to the final
destination, entered by the user. If guidance is activated, the navigation system
calculates it as a current value.
Average speed: this is the average speed calculated since the last trip computer
zero reset (ignition on).
Zero reset
When the required route is displayed, press the control for more than
two seconds.
Loading ...
Loading ...
Loading ...