Loading ...
Loading ...
Loading ...
139
8
4. Operating procedure
Do not extend the jack until you have started
unscrewing the bolts on the wheel to be
changed and have placed the chock under
the wheel diagonally opposite.
Remove the trim pulling it using
the embellisher remover.
Loosen the wheel bolts and start
unscrewing them.
Place the jack in contact with the locating
point provided, the one which is closest to
the wheel to be changed. Ensure that the
base of the jack is in contact with
the ground, and straight above.
Extend the jack to lift the wheel clear of
the ground.
Resume and complete the unscrewing of
the wheel bolts.
Remove the bolts and remove the wheel.
Special tools for vehicles fitted
with alloy wheels
If your vehicle has wheels with alloy rims:
The embellisher is removed using
the alloy wheel embellisher remover.
Each wheel is fitted with an anti-theft bolt.
These bolts can be loosened using your
anti-theft socket (given to you on delivery
of your vehicle along with your confidential
card) and the wheelbrace.
Changing a wheel
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...