Loading ...
Loading ...
Loading ...
User Manual BDH4222V/4223V
44
Accessing Geometric Adjustment Mode
Various geometric adjustments can be set using the Geometric
Adjustment OSD menu. To access the Geometric Adjust sub-menu:
1 Press the MENU +/- keys on the remote or the front control panel.
2 The First menu displayed is the Picture menu. Make sure that the
“Picture” OSD menu is displayed.
3 Use the MENU +/- keys to set the selection to “ON”. As soon as
you press the button, the Geometric Adjust sub-menu will be
displayed.
4 Press the ADJ +/- keys to move up and down to choose the option
you wish to adjust. An explanation of each adjustment is listed
below.
5 Use the ADJ +/- keys to change the setting.
Table below shows an explanation of the available geometric adjustments:
SCREEN WIDTH
Selects the various screen width modes. See page 34 for more information.
NOISE REDUCTION
Adjusts the Noice level. There are four settings to choose: OFF; lOW; MEDIUM;HIGH
GEOMETRIC ADJUST
Opens the Geometric Adjust sub-menu.
NOISE REDUCTION
V-SIZE
Changes the vertical size of the picture. Increase to enlarge the picture size in the vertical direction.
Decrease to reduce the picture size in the vertical direction.
V-CENTER
Changes the vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture
down
.
H-WIDTH
Changes the horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction.
Decrease to reduce the picture size in the horizontal direction.
H-POSITION
Changes the horizontal position of the picture. Increase to shift the picture to the right. Decrease to shift the
picture to the left
.
RETURN
Return to “PICTURE” OSD menu.
Loading ...
Loading ...
Loading ...