Loading ...
Loading ...
Loading ...
75
Setup and Reset
6
6 Setup and Reset
6.5 DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
If the monitor (when set to HDMI 1, HDMI 2 or DisplayPort) is in power saving mode or is
displaying the message Check Signal Cable, press the [ ] button to display the On Screen
Display (OSD). You can select 1.1 or 1.2.
If you select 1.1, the maximum resolution of your screen drops to 2560 x 1440 due to the
limitations in HBR1 transmission speeds.
6.5.1 Configuring DisplayPort Ver.
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to System controlling the JOG button UP/DOWN and press the JOG button.
3 Move to DisplayPort Ver. controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
1.1 / 1.2
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
Off
Off
Auto
Select your
Displayport.
Displayport 1.1
supports HBR 1,
while 1.2 supports
HBR 2.
FreeSync
Eco Saving Plus
Off Timer
PC/AV Mode
DisplayPort Ver.
Source Detection
Key Repeat Time
System
Return
1.1
1.2
Loading ...
Loading ...
Loading ...