Loading ...
Loading ...
Loading ...
Convenient functions
SQT1112
59
Software (Firmware)
Update
Software of this unit can be updated automatically
by the following methods at the specified time.
(Default setting is 3 a.m. > 70, Software Update
in Standby)
• From broadcasts ([For_New_Zealand])
Software of this unit will be updated from
broadcasts if update information is detected.
• From Internet
Network connection and setting are required.
(> 10, 12)
If a software (firmware) update is available, a
notification is displayed.
• It is displayed on the Channel Information
(> 20) when the Software (Firmware) can be
updated immediately.
To execute, press the red button while the
Channel Information is displayed, and follow the
instructions on the screen.
Update of the software (firmware) will start when
the unit is turned to standby mode.
Use the “Software Update Now ( Broadcast )”
([For_New_Zealand]) function or “Software Update
Now ( Internet )” function. (> 70)
You cannot operate the unit until the update
is complete. Don’t remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Update software (firmware) of this unit
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
XXXXXX
1
Now
Dolby DRating: G
Change category
All Digital Channels
NEWS
XXXXX - XXXXX
Software update
e.g.,
To update the software (Firmware)
immediately
• It may take up to a few hours until the update is completed
depending on the network or broadcast environment.
• The timer recording always takes preference over the
software (Firmware) download; if the timer recording is
scheduled to start, the downloading will be performed at the
next opportunity.
• You can also download the latest software (firmware) from
the following website.
http://panasonic.jp/support/global/cs/
DMRPWT560GN_eng.book 59 ページ ２０１６年４月１４日 木曜日 午後１時９分
Loading ...
Loading ...
Loading ...