Loading ...
Loading ...
Loading ...
Connect to playback devices 7
• When charging, the LED on the projector
turns red in power off mode. When fully
charged, the red LED turns off.
Notice
The capacity of the built-in battery
diminishes with time. If the projector
functions only with external power
supply, the built-in battery is defective.
Contact an authorised service centre to
replace the built-in battery.
Power on and setup
1 Press and hold on the projector for
3 seconds to switch the projector on or off.
• When the projector is switched on, the
LED on the projector turns white.
• When charging, the LED on the
projector turns red in power off mode.
Changing screen size
The projection screen size (or size of images) is
determined by the distance between the lens
of the projector and the projection surface.
• The projection image size is to up to 60’’.
• The projection distance is 40 cm - 180 cm
Image sharpness adjustment
To adjust image focus, turn the focus
adjustment knob on the back of the projector.
MICRO SD USB
4 Connect to
playback devices
Connecting to external
speakers or headphones
Connect external speakers or headphones to
the projector. With this connection, audio from
the projector is played through the external
speakers or headphones.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the projector.
Do not use the projector over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1 Using a 3.5 mm audio cable, connect the
connector on the projector to the analogue
audio input (3.5 mm jack, or red and white
jacks) on the external speakers. Or connect
the connector on the projector to
headphones.
• The speakers of the projector are
deactivated automatically when the
external speakers or headphones are
connected to the projector.
MICRO SD USB
Loading ...
Loading ...
Loading ...