Loading ...
Loading ...
Loading ...
Features
24
Baking tray, universal tray and rack
with non-tip safety notches
Baking tray HBB71:
Universal tray HUBB71:
Rack HBBR72:
Insert these accessories into the shelf
runners between the two rails of a shelf
level.
Always place the rack with the loading
surface in the lower position and the non-
tip safety notches towards the back.
Non-tip safety notches are located on
accessories to prevent the trays being
pulled out completely when you only
wish to pull them out partially. They also
prevent trays from tipping.
–
The non-tip safety notches are located
in the middle of the short sides of the
baking tray and universal tray.
– The non-tip safety notches are
located towards the back of the short
sides of the rack.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of a shelf runner and the rack
will sit on top of it.
FlexiClip telescopic runners HFC72
You can use the FlexiClip telescopic
runners on shelf levels1–4.
Push the FlexiClip telescopic runners
right into the oven cavity before
placing accessories on them.
The accessories will then
automatically sit securely between the
stoppers at either end of each runner
and be prevented from sliding off.
The FlexiClip telescopic runners can
support a maximum load of 15kg.
Loading ...
Loading ...
Loading ...