Loading ...
Loading ...
Loading ...
91
TROUBLESHOOTING
ENGLISH
My range is still dirty after running the
SpeedClean™ cycle. What else should I do?
The SpeedClean™ cycle only helps to loosen light
soils in your oven range to assist in hand-cleaning of
your oven. It does not automatically remove all soils
after the cycle. Some scrubbing of your oven range is
required after running the SpeedClean™ cycle.
I tried scrubbing my oven after running
SpeedClean™, but some soils still remain. What can
I do?
The SpeedClean™ feature works best when the
soils are fully soaked and submerged in water before
running the cycle and during hand-cleaning. If soils
are not sufficiently soaked in water, it can negatively
affect the cleaning performance. Repeat the
SpeedClean™ process using sufficient water.
Sugar-based and certain greasy soils are especially
hard to clean. If some stubborn soil remains in the
oven, use the Self Clean feature to thoroughly clean
your oven.
Soil on my oven walls is not coming off. How can
I get the oven walls clean?
Soil on the side and rear walls of your oven range
may be more difficult to fully soak with water. Try
repeating the SpeedClean™
process.
Will SpeedClean™ get all of the soil and stains
out completely?
It depends on the soil type. Sugar-based and certain
grease stains are especially hard to clean. Also, if
stains are not sufficiently soaked in water, this can
negatively affect cleaning performance.
If stubborn or built-up stains remain in the oven, use
the Self Clean feature. Refer to the Self Clean section
of this owner's manual.
Are there any tricks to getting some of the
stubborn soil out?
Scraping soil with a plastic scraper before and during
hand-cleaning is recommended. Fully saturating soil
with water is also recommended.
However, certain types of soil are harder to clean
than others. For stubborn soil, the Self Clean cycle is
recommended. However, self clean only works in the
oven. Consult the Self Clean section of your owner's
manual for details.
Is it safe for my convection fan, broil burner or
heater element to get wet during SpeedClean™?
Yes. The convection fan and broiler heater element
may get a little wet during cleaning. However, direct
spray onto the broil burner and heater elements is
not necessary because these are self-cleaning during
regular use.
I see smoke coming out of my oven range’s
cooktop vents during SpeedClean™. Is this
normal?
This is normal. This is not smoke. It is actually water
vapor (steam) from the water in the oven cavity. As
the oven heats briefly during SpeedClean™, the
water in the cavity evaporates and escapes through
the oven vents.
How often should I use SpeedClean™?
SpeedClean™ can be performed as often as you
wish. SpeedClean™ works best when your oven is
LIGHTLY soiled from such things as LIGHT grease
splatter and small drops of cheese. Please refer to
the SpeedClean™ section in your owner's manual for
more information.
Can I run the SpeedClean™ cycle on my ovens at
once?
Yes. You can run the SpeedClean™ cycle on the
ovens at the same time. Some oven surfaces will be
hot after the cycle completes running. Avoid leaning
or resting on the oven door glass while cleaning the
oven cavities.
Loading ...
Loading ...
Loading ...