Loading ...
Loading ...
Loading ...
85
MAINTENANCE
ENGLISH
Cleaning Tips
•
Allow the oven to cool to room temperature before
using the SpeedClean™ cycle.
•
A plastic spatula can be used as a scraper to
scrape off any chunks or debris before and during
oven cleaning.
•
Using the rough side of a non-scratch scouring pad
may help to take off burnt-on stains better than a
soft sponge or towel.
•
Certain non-scratch scrubbing sponges, such as
those made of melamine foam, available at your
local stores, can also help improve cleaning.
•
Make sure the range is level for best results when
cleaning the oven.
•
For best results, use distilled or filtered water. Tap
water may leave mineral deposits on the oven
bottom.
•
Soil baked on through several cooking cycles will
be more difficult to remove with the SpeedClean™
cycle.
•
Do not open the oven door during the
SpeedClean™ cycle. Water will not get hot enough
if the door is opened during the cycle.
•
The self-clean cycle is better for cleaning hard to
reach areas such as the back of the oven cavity.
Self Clean
The Self Clean cycle uses extremely hot temperatures
to clean the oven cavity. While running the Self Clean
cycle, you may notice smoking or an odor. This is
normal; especially if the oven is heavily soiled.
During Self Clean, the kitchen should be well
ventilated to minimize the odors from cleaning.
Before Starting Self Clean
•
Remove the oven racks, broiler pan, broiler grid,
steam trays, oven rack guides, all cookware,
aluminum foil or any other material from the oven.
•
The kitchen should be well ventilated to minimize
the odors from cleaning.
•
Wipe any heavy spillovers on the bottom of the
oven.
•
The LED lighting inside the oven should be turned
off. Make sure the LED cover is in place.
•
The LED lighting inside the oven cannot be turned
on until the oven temperature has cooled below
500 ˚F (260 ˚C) after a Self Clean cycle is complete.
Removing the Rack Guides
Before starting Self Clean, you must remove the rack
guides.
1
Open the oven door.
2
Turn the 2 bolts on each rack guide
counterclockwise to remove the guides.
Loading ...
Loading ...
Loading ...