Loading ...
Loading ...
Loading ...
(472,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
9-12. If Your Vehicle Is In-
volved in an Accident
s09ar
& To Restart the Engine When
Involved in an Accident
s09ar02
CAUTION
If your vehicle is involved in an
accident, be sure to inspect the
ground under the vehicle before
restarting the engine. If you find that
fuel has leaked on the ground, do
not try to restart the engine. The fuel
system has been damaged and is in
need of repair. Immediately contact
the nearest automotive service facil-
ity. We recommend that you consult
your SUBARU dealer.
Your vehicle has a fuel pump shut off
system. When the vehicle sustains an
impact in an accident, etc., the fuel pump
shut off system stops supplying the fuel in
order to minimize fuel leakage.
Perform the following procedures to restart
the engine after the system is activated.
Models without “keyless access with
push-button start system”:
1. Turn the ignition switch to the “LOCK”
or “ACC” position.
2. Restart the engine.
Models with “keyless access with
push-button start system”:
1. Turn the push-button ignition switch to
the “ACC” or “OFF” position.
2. Restart the engine.
& Automatic Door Locking/Un-
locking Operation When In-
volved in an Accident
s09ar03
When the automatic door locking/unlock-
ing function is ON, all the doors will be
locked automatically while driving. For
further details, refer to “Automatic Door
Locking/Unlocking” FP140.
When the vehicle sustains a strong impact
which may trigger the airbags to deploy,
the door locks may be unlocked automa-
tically to enable emergency escape. Gen-
erally, an impact sustained from a rear end
collision does not trigger the airbags to
deploy. However if the impact is strong
enough to deploy the airbags, it can also
trigger the unlocking function.
Under such circumstance, the automatic
door locking/unlocking function will be
suspended and the doors will remain
unlocked.
Confirm the safety of the surroundings first
and carry out the following to retrieve the
automatic door locking/unlocking function.
Models without “keyless access with
push-button start system”:
1. Turn the ignition switch to the “LOCK”
position.
2. Turn the ignition switch to the “ON”
position.
Models with “keyless access with
push-button start system”:
1. Turn the push-button ignition switch to
the “OFF” position.
2. Turn the push-button ignition switch to
the “ON” position.
NOTE
Depending on the severity of the im-
pact, the emergency unlocking may not
function.
CAUTION
If the following occur, there may be a
malfunction in the system.
Have the system inspected by a
SUBARU dealer.
. The doors unlock automatically
while driving.
. With all doors shut, the doors
unlock when pressing the lock
side of the power door locking
switch.
If Your Vehicle Is Involved in an Accident
470
Loading ...
Loading ...
Loading ...