Loading ...
Loading ...
Loading ...
(251,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
“ ” position: Auto on/off headlights
When the ignition switch is in the “ON”
position, the instrument panel illumination,
headlights, parking lights, front side mar-
ker lights, rear side marker lights, tail lights
and license plate lights are automatically
on or off depending on the level of the
ambient light.
The light sensitivity of the auto on/off
headlights can be changed by operating
the center information display. For details,
refer to “Car settings” FP220 (11.6-inch
display models) or “Vehicle setting icons”
FP239 (dual 7.0-inch display models).
Also, the setting can be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
! Auto-on/off wiper-linked headlights
s03ah0106
While the light control switch is in the
“AUTO” position, the headlights will auto-
matically turn on when the windshield
wipers operate several times. The head-
lights will automatically turn off approxi-
mately 1 minute after the wiper stops.
The ON/OFF setting of this function can be
changed by operating the center informa-
tion display. For details, refer to “Car
settings” FP220 (11.6-inch display mod-
els) or “Vehicle setting icons” FP239 (dual
7.0-inch display models). Also, the setting
can be changed by a SUBARU dealer.
Consult your SUBARU dealer for details.
! Welcome lighting function
s03ah0103
The welcome lighting function turns on the
low beam headlight for smooth approach-
ing to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
. The light control switch is in the “AUTO”
position.
. It is dark enough to turn on the auto on/
off headlights.
! When approaching
s03ah010301
While the welcome lighting function is
activated, the low beam headlights will
automatically illuminate when unlocking
the doors (for Outback, including the rear
gate) by using the remote keyless entry
system.
The low beam headlights will remain
illuminated for 30 seconds*
1
and then turn
off. However, if any of the following
operations is done, the low beam head-
lights will turn off.
. The doors are locked.
. The light control switch is turned to a
position other than “AUTO”.
! When exiting
s03ah010302
While the welcome lighting function is
activated, the low beam headlights will
remain illuminated even when either of the
following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The low beam headlights will turn off under
any of the following conditions.
. 3 minutes have passed since the low
beam headlights were illuminated by the
welcome lighting function.
. 30 seconds have passed since the door
is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
– CONTINUED –
Light Control Switch
249
3
Instruments and Controls
Loading ...
Loading ...
Loading ...