Loading ...
Loading ...
Loading ...
(156,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
Power rear gate button on the access key
fob
To open the rear gate:
Press and hold the power rear gate button
when the rear gate is closed. The rear gate
will open automatically. Then an electronic
chirp and the hazard warning flashers will
operate as follows:
. When operating the power rear gate
button on the instrument panel: sounds
and flashes twice.
. When operating the power rear gate
button on the access key fob: sounds and
flashes four times.
NOTE
. While the rear gate is locked, you
cannot open the rear gate by operating
the power rear gate button on the
instrument panel. In such a case,
unlock the rear gate before operating
the power rear gate button.
. The factory setting (default setting)
of the operation for the “
” button on
the access key fob or the transmitter is
pressing and holding. This setting can
be changed to non-operation or press-
ing twice at SUBARU dealers. For more
details, contact a SUBARU dealer.
To pause the opening rear gate:
Briefly press the power rear gate button
while the rear gate is being opened. Then
an electronic chirp will sound twice and the
hazard warning flashers will flash twice.
If you press the power rear gate button
again, the rear gate will close.
You can open the rear gate by pressing the
power rear gate button briefly while the
rear gate is being closed.
NOTE
The rear gate cannot be paused when it
is in the approximately 2 in (5 cm) range
from the fully closed position. The
system will ignore any button operation
and the rear gate will continue to open.
To close the rear gate:
Press and hold the power rear gate button.
Then an electronic chirp will sound twice
and the hazard warning flashers will flash
twice. If you briefly press the power rear
gate button again, the rear gate will open.
Rear Gate (Outback)
154
Loading ...
Loading ...
Loading ...