Loading ...
Loading ...
Loading ...
(398,1)
北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
& Operating Conditions
s07bn02
The Reverse Automatic Braking (RAB)
system will operate when all of the follow-
ing conditions are met.
1) EyeSight warning indicator
2) RAB warning indicator
3) RAB OFF indicator
. The ignition switch is in the “ON”
position.
. The EyeSight warning indicator is off.
. The RAB warning indicator is off.
. The RAB OFF indicator is off.
. The select lever is in the “R” position.
Object detection warning function
. The object detection warning function is
set to “ON”.
. The vehicle speed is from 0 to 9 mph (0
to 15 km/h).
Reverse Automatic Braking (RAB) sys-
tem function
. The Reverse Automatic Braking (RAB)
system function is set to “ON”.
. The vehicle speed is from 1 to 9 mph
(1.5 to 15 km/h).
NOTE
. In the following cases, the Reverse
Automatic Braking (RAB) system will
not operate. Promptly contact a
SUBARU dealer to have the system
inspected.
– The EyeSight warning indicator
is illuminated.
– The RAB warning indicator is
illuminated.
. In the following cases, the Reverse
Automatic Braking (RAB) system can-
not be operated.
– The
(EyeSight Temporary Stop
indicator: White) is illuminated, and
the messages corresponding to the
EyeSight temporary stop are dis-
played on the combination meter
display (color LCD). For details,
refer to the Owner’s Manual supple-
ment for the EyeSight system.
– The RAB OFF indicator is illumi-
nated.
. In the following cases, the functions
may not be able to properly work.
Promptly contact a SUBARU dealer to
have the system inspected.
– A sticker, paint, or a chemical is
applied to the sonar sensors or the
rear bumper near the sonar sensor.
– The rear bumper is modified.
– The rear bumper has been re-
moved and attached.
– The ground clearance is changed
due to the vehicle’s loading condi-
tion or modification.
– There is damage to the sonar
sensors or the rear bumper near
the sonar sensor.
– The rear bumper is exposed to
strong impact, or the rear bumper is
deformed.
. On a steep hill, the system’s auto-
matic braking ability will be reduced.
. The system is designed to avoid
collisions by automatic hard braking
when the vehicle’s reversing speed is
less than approximately 3 mph (5 km/h).
However, the system does not guaran-
tee that the vehicle will be able to avoid
collisions in any situation.
. If the vehicle is reversed at an
extremely slow speed, the driver’s
operation may be prioritized. In this
case, automatic braking will not oper-
Reverse Automatic Braking (RAB) System
396
Loading ...
Loading ...
Loading ...