Loading ...
Loading ...
Loading ...
MULTIMEDIA 433
8. When prompted on the mobile phone,
accept the connection request from
Uconnect Phone.
NOTE:
Some mobile phones will require you to enter
the PIN.
9. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
phone. Selecting “Yes” will make this phone
the highest priority. This phone will take
precedence over other paired phones within
range and will connect to the Uconnect
system automatically when entering the
vehicle. Only one mobile phone and/or one
Bluetooth® audio device can be connected
to the Uconnect system at a time. If “No” is
selected, simply select Uconnect from the
mobile phone/audio device Bluetooth®
screen, and the Uconnect system
reconnects to the Bluetooth® device.
NOTE:
Software updates on your phone or the
Uconnect system may interfere with the
Bluetooth® connection. If this happens, simply
repeat the pairing process. However, first, make
sure to delete the device from the list of phones
on your Uconnect system. Next, be sure to
remove Uconnect from the list of devices in your
phone’s Bluetooth® settings.
Phonebook Download — Phonebook
Transfer From Mobile Phone
If equipped and specifically supported by your
phone, Uconnect Phone will ask you if you want
to download names (text names) and number
entries from your mobile phone’s phonebook.
Specific Bluetooth® Phones with Phonebook
Access Profile may support this feature. See
UconnectPhone.com for supported phones.
Receiving A Call — Accept (And End)
1. When an incoming call rings or is
announced on Uconnect, push the PHONE
button on the faceplate.
2. To end a call, push the PHONE button on the
steering wheel or the PHONE button on the
faceplate.
NOTE:
A phone call can also be accepted, and ended
by pushing the steering wheel PHONE button.
Transfer Ongoing Call Between Handset
And Vehicle
With a call in progress use the browse/enter
scroll wheel to select transfer then press the
enter button or push the “Phone Pickup” button
on the steering wheel controls during a call,
push the Voice Recognition button on the
steering wheel. After the BEEP, say “transfer
call.”
UCONNECT 3 WITH 5-INCH DISPLAY
INTRODUCTION
Uconnect 3 With 5-inch Display
1 — RADIO
Push the RADIO button on the faceplate to enter
Radio Mode. The different tuner modes;
FM/AM/SXM (if equipped), can be selected
by pressing the corresponding buttons on the
touchscreen in Radio Mode.
9
20_DPF_OM_EN_USC_t.book Page 433
Loading ...
Loading ...
Loading ...