User Manual - Page 432

For RAM 2020 CHASSIS CAB.

Loading ...
Loading ...
Loading ...
430 MULTIMEDIA
Time and Format setting and then select
Set Time by pushing the ENTER/BROWSE
button.
2. Adjust the hours or minutes by turning the
TUNE/SCROLL knob, then pushing the
ENTER/BROWSE button to move to the next
entry. You can also select 12 hr or 24 hr
format by turning the TUNE/SCROLL knob,
then pushing the ENTER/BROWSE button
on the desired selection.
3. Once the time is set, press the BACK button
to exit the time screen.
MEDIA MODE
Operating Media Mode
Media Mode is entered by pushing the MEDIA
button on the faceplate located to the left of the
display. Once in Media Mode, press the MEDIA
button in order to select the desired media
source.
Audio Source Selection
Push the MEDIA button on the faceplate to
select the desired audio source, disc (if
equipped), AUX, USB or Bluetooth® audio
device.
Seek Up/Seek Down
Push and release the SEEK UP button on the
faceplate for the next selection.
Push and release the SEEK DOWN button on
the faceplate to return to the beginning of the
current selection, or return to the beginning of
the previous selection if the Media is within the
first three seconds of the current selection.
Fast SEEK UP
Push and hold the SEEK UP button on the
faceplate and the desired mode will begin to
fast forward through the current track until the
button on the faceplate is released.
Fast SEEK DOWN
Push and hold the SEEK DOWN button on
the faceplate and the desired mode will begin to
rewind through the current track until the
button on the faceplate is released.
Track Info
Push the INFO button on the faceplate to
display the current track information.
Audio
Refer to “Operating Radio Mode” in “Radio
Mode” for the adjustable audio settings.
USB/iPod® Mode
USB/iPod® Mode is entered by either inserting
a USB Jump Drive or iPod® cable into the USB
port, or by pushing the MEDIA button on the
faceplate located to the left of the display. Once
in Media Mode, push the MEDIA button and
select USB/iPod®.
Inserting USB/iPod® Device
Gently insert the USB/iPod® device into the
USB port. If you insert a USB/iPod® device with
the ignition ON/RUN and the radio On, the unit
will switch to USB/iPod® mode and begin to
play when you insert the device. The display will
show the track number, and index time in
minutes and seconds. Play will begin at the start
of track 1.
Bluetooth® Mode
Bluetooth® Streaming Audio (BTSA) or
Bluetooth® Mode is entered by pairing a
Bluetooth® device containing music to the
Uconnect system.
Before proceeding, the Bluetooth® device must
be paired with the Uconnect Phone to
communicate with the Uconnect system.
Once the Bluetooth® device is paired to the
Uconnect system, push the MEDIA button
20_DPF_OM_EN_USC_t.book Page 430
Loading ...
Loading ...
Loading ...