Schwinn 700IC ASSEMBLY MANUAL & OWNER’S MANUAL

Loading ...

Replacing the Console Batteries

When the batteries are low on power, the console display contrast will dim.

When replacing the batteries, make sure the batteries point in the +/- direction shown in the battery bay.

Note: The console uses AA size alkaline batteries (SUM3)

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.

Besuretoremovethebatteriestopreventcorrosiondamageifyouarenotgoingtousethemachineforanextended

period of time.

Checking the Drive Belt Tension

To check the Drive Belt tension, the bike needs to be operated. Set the resistance at a medium to high level. Get the

pedalsrotatingatabout20RPM.ThensuddenlyincreasetheRPMtoyourmaximumability.Ifthepedalsmovenormally

with no slipping, the tension is correct. If the Pedals slip, the belt needs to be adjusted.

An“AdjusttheBeltTension”procedurecanbefoundintheServiceManual.

Loading ...

Schwinn 700IC formerly IC7 Indoor Cycling Bike