Schwinn 700IC ASSEMBLY MANUAL & OWNER’S MANUAL

Loading ...

4. Attach Pedals to Frame Assembly

If the threads strip due to improper installation, then the Pedals can disengage from the bike and/or break

while under usage, which can result in serious injury to the user.

Note: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based

fromaseatedpositiononthebike.TheLeftPedalhasan“L”,theRightPedalan“R”.

NOTICE: The Pedals MUST be installed straight into the Crank

Arms by hand or the threads that secure the Pedals may strip.

Start the Pedal by hand. If you feel resistance and the Pedal

does not turn smoothly into the Crank Arm, make sure that the

threads are aligned correctly. Be sure that the Pedal is going on

straight into the Crank Arm. If the Pedal is not in-line with the

opening, remove the Pedal and start again.

With the Pedal started by several hand turns into the Crank Arm, fully tighten it with the 15 mm Wrench.

Confirm that the Pedal is fully tightened with the Wrench.

Repeat with the other Pedal.

Loading ...

Schwinn 700IC formerly IC7 Indoor Cycling Bike