Loading ...
Loading ...
Loading ...
WARNING
Objects on the head restraint reduce the
protective effect in the head and neck area.
There is a risk of injury.
▷ Do not use seat or head restraint covers.
▷ Do not hang objects, for instance clothes
hangers, directly on the head restraint.
▷ Only use accessories that have been deter‐
mined to be safe for attachment to a head
restraint.
▷ Do not use any accessories, for instance pil‐
lows, while driving.◀
Adjusting the height
▷ To lower: press the button, arrow 1, and
push the head restraint down.
▷ To raise: push the head restraint up.
After setting the height, move the head re‐
straint up or down slightly, making sure it en‐
gages properly.
Fold down
▷ To fold down: press the button, arrow 1,
and press down the head restraint, arrow 2.
▷ Forward: fold the head restraint toward the
front as far as it will go. Make sure that the
head restraint engages correctly.
Removing
Only remove the head restraint if no one will be
sitting in the seat in question.
1. Fold down the rear seat backrest, refer to
page 198, in question.
2. Pull head restraint up against the resist‐
ance.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the head
restraint.
Memory function
Concept
The following settings can be stored and, if
necessary, retrieved using the memory func‐
tion:
▷ Seat position.
▷ Exterior mirror position.
▷ Height of the Head-up Display.
General information
Different settings can be assigned to two mem‐
ory locations.
Seite 80
CONTROLS
Settings
80
Online Edition for Part no. 01402983594 - X/17
Loading ...
Loading ...
Loading ...