Loading ...
Loading ...
Loading ...
Fold back the backrest
1. Pull the strap.
2. Fold the rear seat backrest rearward.
Variable cargo area
floor
Concept
With the variable cargo area floor, the cargo
area can be configured corresponding to trans‐
port requirements.
General information
Follow instructions on securing cargo, refer to
page 196.
Removing the cargo floor panel
1.
Fold the rear part of the cargo floor panel
upward.
2. Grasp the cargo floor panel at the rear and
fold it upward.
3. Pull the cargo floor panel backward from
the brackets.
Inserting the cargo floor panel
1. Push the cargo area floor into the supports
at a shallow angle. The cargo area floor
must engage noticeably.
2. Fold the cargo area floor over downward.
MINI Picnic Bench
Concept
The MINI Picnic Bench provides a comfortable
seating surface on the loading lip of the vehicle.
General information
Only use the MINI Picnic Bench while the vehi‐
cle is parked and with the tailgate open. When
the MINI Picnic Bench is not in use, fold it to‐
gether to prevent soiling and damage.
In vehicles with a no-touch opening and closing
tailgate:
If the remote control is in the sensor area, the
tailgate can be opened or closed inadvertently
by an unconscious or alleged recognized foot
movement.
The sensor has an approximate range of
5 ft/1.50 m extending from the rear of the vehi‐
cle.
Seite 200
CONTROLS
Cargo area
200
Online Edition for Part no. 01402983594 - X/17
Loading ...
Loading ...
Loading ...