Loading ...
Loading ...
Loading ...
Warning with braking function
Display
If a collision with a person detected in this way
is imminent, a warning symbol appears on the
instrument cluster and in the Head-up Display.
The red symbol is displayed and a signal
sounds.
Intervene immediately by braking or
make an evasive maneuver.
Braking intervention
The warning prompts the driver to react. During
a warning, the maximum braking force is used.
Prerequisite for the brake booster is sufficiently
quick and sufficiently hard stepping on the
brake pedal. If there is a risk of collision, the
system may assist with braking.When the vehi‐
cle is traveling at a low speed, the vehicle may
come to a complete stop.
The braking intervention occurs only if vehicle
stability has not been restricted, for instance by
deactivating the DSC Dynamic Stability Control.
The driver may cancel the braking intervention
by stepping on the accelerator pedal or by ac‐
tively moving the steering wheel.
Object detection can be restricted. Follow the
limitations of the detection range and func‐
tional restrictions.
System limits
Safety information
WARNING
The system can react not at all, too late,
incorrectly, or without justification due to the
system limits. There is a risk of accidents or risk
of damage to property. Follow the information
regarding the system limits and actively inter‐
vene, if needed.◀
Detection range
The detection potential of the camera is lim‐
ited.
Thus, a warning might not be issued or be is‐
sued late.
E.g., the following situations may not be de‐
tected:
▷ Partially covered pedestrians.
▷ Pedestrians that are not detected as such
because of the viewing angle or contour.
▷ Pedestrians outside of the detection range.
▷ Pedestrians having a body size less than
32 in/80 cm.
Functional limitations
The system may not be fully functional or may
not be available in the following situations:
▷ In heavy fog, wet conditions, or snowfall.
▷ In tight curves.
▷ If the field of view of the camera or the
windshield are dirty or covered.
▷ If the driving stability control systems are
deactivated, for instance DSC OFF.
▷ Up to 10 seconds after the start of the en‐
gine via the Start/Stop button.
▷ During calibration of the camera immedi‐
ately after vehicle delivery.
▷ If there are constant blinding effects be‐
cause of oncoming light, for instance from
the sun low in the sky.
▷ When it is dark outside.
Brake force display
Concept
Additional brake lights indicate emergency
braking to the traffic behind. This can reduce
the risk of a rear-end collision.
Seite 152
CONTROLS
Safety
152
Online Edition for Part no. 01402983594 - X/17
Loading ...
Loading ...
Loading ...