Loading ...
Loading ...
Loading ...
Rear window wiper
Overview
Switching on the rear window wiper
Turn the outer switch upward.
▷ Resting position of the wiper, position 0.
▷ Intermittent mode, arrow 1. When reverse
gear is engaged, the system switches to
continuous operation.
Clean the rear window
Turn the outer switch in the desired direction.
▷ In resting position: turn the switch down‐
ward, arrow 3. The switch automatically re‐
turns to its resting position when released.
▷ In intermittent mode: turn the switch fur‐
ther, arrow 2. The switch automatically re‐
turns to its intermittent position when re‐
leased.
Fold-away position of the wipers
Concept
The fold-out position enables the wipers to be
folded away from the windshield.
General information
Helpful when changing the wiper blades or un‐
der frosty conditions, for instance.
Safety information
WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or dam‐
age may occur to parts of the vehicle. There is a
risk of injury or risk of damage to property.
Make sure that the vehicle is switched off when
the wipers are in the folded away state and the
wipers are folded in when switching on.◀
NOTE
If the wipers are frozen to the windshield,
the wiper blades can be torn off and the wiper
motor can overheat when switching on. There
is a risk of damage to property. Defrost the
windshield prior to switching the wipers on.◀
Folding away the wipers
1.
Switch the ignition on and off again.
2. Press and hold the wiper level down, until
the wipers stop in a close to vertical posi‐
tion.
3. Fold the wipers all the way away from the
windshield.
Seite 100
CONTROLS
Driving
100
Online Edition for Part no. 01402983594 - X/17
Loading ...
Loading ...
Loading ...