Loading ...
Loading ...
Loading ...
65
Lower Oven Self-Clean
Setting fresh clean
The clean feature provides 3 different choices for
self-cleaning the lower oven. Set the clean for lite
(2 hrs), med (3 hrs) or heavy soils (4 hrs). The
example below shows setting the lower oven for
self-clean to begin immediately using a medium (3
hour) setting:
Setting delayed fresh clean
You may wish to set your appliance to perform a
self-clean cycle sometime later (up to 12 hours
later). The END TIME key will determine when the
cleaning will stop.
You will need to set the END TIME out far enough
to allow for the type of clean cycle you choose
(2-3-4 hours). Remember to add 30-40 additional
minutes for the oven to cool enough and the oven
door to unlock.
The example below shows setting the lower oven
for a lite (2 hour) self-clean cycle to end at 8:00
o’clock:
After pressing start, the motorized oven door latch
will automatically lock the door. The DOOR lock
iconwillash(Fig.1).Oncethedoorhaslocked
the DOOR lock icon will remain on through the
entire self-clean cycle.
After self-clean, the oven may take about 30-40
minutes to cool and unlock. A Hot message (Fig.
2) will display during this period. During cooling the
DOORlockiconwillashanddisappearindicating
that the door has unlocked.
IMPORTANT
• A self-clean cycle will not start if the appliance
has the CONTROL LOCK turned on.
• If a self-clean cycle was started but did not
nishduetoapowerfailure,yourovenmay
not be completely cleaned. After power
has been restored and the oven door has
unlocked, set for another self-clean if needed.
Fig. 2
Fig. 1
Example
NOTES
• You may press CANCEL any time during the
cleaning process. After cancelling the self-
clean cycle, do not attempt to open the oven
door until the DOOR lock icon turns off.
Example
Step Press
1. Remove racks and supports
and press LOWER OVEN
2. Press FRESH CLEAN
3. Select MED or
select lite or heavy
4. Press START
Example
Step Press
1. Remove racks and
press LOWER OVEN
2. Press FRESH CLEAN
3. Select LITE
4. Press COOK OPTIONS
5. Press END TIME
6. Enter 800
7. Press START
Loading ...
Loading ...
Loading ...