Loading ...
Loading ...
Loading ...
17
Timers
Getting Started
Setting clock at power up
You will be prompted to enter the time of day in the
event of a power failure or when you rst provide
electric power to your appliance.
• Whenyourapplianceisrstpoweredup,12:00
willashinthedisplay.
• Enter the time of day using the numeric key pads
and press START to set.
If an invalid time of day is entered, the control will
triple beep. Re-enter a valid time of day and press
START. If CANCEL is pressed your clock will start
with the time set for 12:00.
Select the user pref key to modify the time of day
during other situations such as day light savings.
See example below to set the timer for 5 minutes:
Sleep mode
Your control will remain in a sleep mode when not
in use, unless there is a hot element -Fig.1-. Only
the clock will display during this mode. You will
need to wake the control to begin any function.
Awake mode
To awake the control touch within the display panel
-Fig. 2-. If the control panel is not touched again
within 2 minutes, the control will return to the sleep
mode. To start cooking you must select either the
micro oven or the lower oven. User preferences
will be available during this mode as well as timers,
oven light and the control lock.
NOTE
The timer(s) will not affect the cooking process.
The two timers provided with the oven control
serve as extra reminders in the kitchen. When a
timer reaches less than 1 minute the display will
start to count down in seconds. When the time runs
out the active timer will beep, "0:00"willash.
The following time settings apply to the timers:
• Min. time: 1 minute
• Max. time: 11 hours 59 minutes
To cancel after setting the timer, press the TIMER
key again.
Display modes
Example
Step Press
1. Press TIMER
2. Enter 5 minutes
3. Press TIMER
Sleep mode Fig.1
Awake mode Fig.2
Loading ...
Loading ...
Loading ...