Loading ...
THIS APPLIANCE MUST BE MOUNTED UNDER AN APPROVED
VENTILATION HOOD. CONTACT A LICENSED GAS CONTRACTOR IN
ACCORDANCE WITH THE LOCAL CODES (OR IN THE ABSENCE OF
LOCAL CODES, WITH THE NATIONAL FUEL GAS CODE, ANSI
Z223.1/NFPA 54) FOR INSTALLATION.
This appliance is not intended to be installed underneath a cabinet.
This appliance must be electrically grounded in accordance with the local codes or, in
the absence of local codes, with the National Electrical Code, ANSI/NFPA 70.
The appliance and its individual shutoff valve must be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in excess of ½
psi (3.5 kPa).
The appliance must be isolated from the gas supply piping system by closing its
individual manual shutoff valve during any pressure testing of the gas supply piping
system at test pressures equal to or less than ½ psi (3.5 kPa).
The appliance must not be used for space heating purposes.
The cooking area or the exterior top areas are not for storage purposes.
The appliance must be disconnected from the electrical supply before servicing.
This appliance comes set for the type of gas as specified on the rating plate and tag on
the unit. If a different type of gas is required, please contact your local authorized gas
technician.
Leak Testing of the appliance shall be conducted according to the manufacturer’s
instructions.
WARNING
Electrical Grounding Instructions
This appliance is equipped with a three-prong grounding plug for your protection
against shock hazard and should be plugged directly into a properly grounded
receptacle. Do not cut or remove the grounding prong from this plug.
Loading ...
Loading ...
Loading ...