Instruction Manual Robot Vacuum


Top/side

Botton

Dust box

Charging dock

Remote conrol



1: Placing and charging: The charging dock is against the wall and placed on a flat ground. Do not place objects within the range of 0.5m left, right and 1.5m ahead

2: Plug the adapter to the corrresponding outlet and connect the charging dock with it.
3: Installing side brushes according to the left and right

4: Charging: Place the Robot on the charging seat for charging(During charging, the indicator tight flashes and when charging is over, the light is always on. The charging time is about 4 hours.)

During the cleaning process, the host can sense that its power is insufficient and automatically start the recharging mode to find the charging dock to change.
You can also command the host to start the recharging mode through the HOME button
of the remote controller
Charging attention
1: The charging seat cannot be used in enviroments with strong effection such as direct sunlight and nearby mirrirs. If there is any object with strong reflectiin, please cover the object 7 cm high from thr bottom.
2: In order to ensure the normal working hours of the appliance, please fully charge before use. The charging time is about 4 hours.
3: Do not charge with the water tank units assembled so as to ensure the safety pf charging and prevent wet rags from damaging the floor.
Start cleaning
To meet diffirent cleaning requirment, this appliance has kinds of cleaning mode to choose from. You can start various cleaning mode through a Robot, remote control or the app.
Auto cleaning
Applicable scene: it is the most commonly used cleaning method that the main engine uses a bow-shaped path to plan and clean the whole house according to the actual enviromant.
Setting method: In the shutdown state, long press the key on the main engine to switch it on. Short press the key to start automatic cleaning.
For using the remote control, press the
button to switch the mode to auto cleaning at any circumstances

Spot cleaning
Applicable scene: It is usually used for cleaning one single room or a small area.
Tips: When it is only neccessary to clean one single room, please close the door and the host will do centralized cleaning in the room if this room does not have a charging seat. The robot will return to the original point where it starts after cleaning.

Edge cleaning
Applicable scene: For indoor corner cleaning the robot cleans along the perimeter of fixed object, and returns to the charging seat after the edge cleaning is finished.

Manual control
Applicable scene:Suitable for manual control cleaning.
Setting method: Click on position button of the remote controller to control the machine to move forward and make a turn by turning left and right.

Pause: During the operation of the robot, press the start/pause key or the paise button
on the remote control to pause opperation of the robot.
Wake up: if the robot stops working for more than ten minutes, it will automatically enter sleep mode. You can wake up the robot by press the start key first. Then press the robot key or any keys on the remote control and app to restart your work
With three vacuuming power can be adjusted to meet diffirent requiement. Standard suction mode can be used for cleaning wood floor and file floor, boost mode for common household cleaning while the max mode can be used for cleaning rugs


Duat box


Open the main brush cover

Take out the main brush shaft

Cleaning tangled hair on the brush

Cleaning the side brush

Tip

Q: What should l do when it can not work on the carpet?
A: We don't seggest you make it clean the carpet. It's better for you to set the barrier around the carpet on the app
Q: What if the strength of vacuuming is weak?
A: First of all, check whether the dust bin is full and the robot is ull charged. If it does, you can try to switch it to the higher mode. For litter which is difficult to collector, try to clean it with Spot Cleaning Mode.
Q: What if my charger has difficulties charging the robot?
A: Please check if the electrical sheet is connected to the charging stand or put it back manually.
Q: What if the robot can not find charging the robot?
A: The charging stand should be placed against the wall with at least 1 meter clearance each side and 2 meters in front. Sometimes you can just put it back manually.
Q: What should l do if the side brush/main brush/ wheel is stuck?
A: Check whether the side brush is trapped by wire and clean up the blockage.
Q: What should l do if WIFI connection falls?
A: Check whether the wireless network is working and reconnect following WIFI Connection.