Loading ...
Loading ...
Loading ...
en Steam
18
▶
Only fill the water tank with water or with the descal-
ing solution we have recommended.
WARNING‒Risk of burns!
The water tank may heat up while the appliance is in
operation.
▶
Wait until the water tank has cooled down from the
previous operation.
▶
Remove the water tank from the tank recess.
Requirement:The water hardness must be set cor-
rectly.
→"Before using for the first time", Page14
1.
Press .
a The control panel will pop out automatically.
2.
Pull the control panel towards you with both hands
and then push it upwards until it clicks into place .
3.
Lift the water tank and remove it from the water tank
recess .
4.
Press down on the water tank lid along the seal to
prevent water from leaking out of the water tank.
5.
Fill the water tank with water up to the "max"
mark.
6.
Slide the full water tank back into the recess .
When doing so, make sure that the water tank clicks
into place in the retainers .
7.
Slowly slide the control panel downwards and then
push it away from you until it is closed completely.
11.2 Types of steam heating
A variety of types of steam heating are available for
which hot steam is used to gently prepare food.
Dough proving
Yeast dough proves considerably more quickly using
this function than at room temperature, and it will not
dry out.
Reheating
The reheating function can be used to warm up food
that has already been cooked, or bread and pastries
from the day before.
Setting the type of steam heating
Note:
Observe the instructions for the types of steam heating:
¡ →"Types of steam heating", Page18
¡ A cooking time must always be set for steam heat-
ing.
Requirement:The water tank has been filled.
→"Filling the water tank", Page17
1.
Press .
2.
Press "Steaming".
3.
Use the rotary selector to select the required steam
type of heating.
4.
Press the temperature.
5.
Use the rotary selector to set the temperature.
6.
Press the cooking time.
7.
Use the rotary selector to set the cooking time.
8.
Press to start the operation.
Note:If the water tank runs dry during operation, a
notification appears in the display. Operation is
stopped.
→"Filling the water tank", Page17
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. The time shown in the display is zero.
9.
Once the cooking time has elapsed:
‒ Press to silence the audible signal manu-
ally.
‒ To set another cooking time, press the cooking
time and use the rotary selector to set the value.
‒ When the food is ready, press to switch the
appliance off.
10.
Empty the water tank and dry the cooking compart-
ment.
→"After every steam operation", Page19
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1.
Press to pause operation.
2.
Press the type of heating.
3.
Turn the rotary selector to select the required type
of heating.
a The corresponding recommended temperature ap-
pears on the display.
Changing the cooking time
You can change the cooking time at any time.
Loading ...
Loading ...
Loading ...