Loading ...
Loading ...
Loading ...
VD (E3.1) 10/2020 page 29/179
(13) Connection for extraction
(14) SUB-D socket to turn on/off the vacuum
pump
(15) Miniature fuse 8,0 A 250 V AC (T) 5x20mm
for vacuum pump 230 V or 120 V
(16) Connection socket 230 V / 16 A for IEC
connector plug 230 V AC to vacuum pump
230 V
Connection socket 125 V / 15 A for IEC
connector plug 100-120 V AC to vacuum
pump 120 V
(17) Electrical connection socket for the vacuum
pump
Figure 13: Pump module, interior view with socket for the vacuum pump
Maximum admissible load of the socket:
Standard 230 V / 50 Hz - 16 Amp
cUL-version 120 V / 60 Hz - 13 Amp
With CUL-version, connect only a UL listed vacuum pump with ratings of 120 V AC, 60 Hz,
and less or equal 12 Amp, 0.5 HP.
Mounting the VD on the pump module is described in detail in the mounting instructions Art. No. 7001-
0137. Proceed accordingly.
4.3.1 Pump module without pump (option)
Connection to a vacuum source
Connect the vacuum connection (6) (small flange DN 16) at the rear of the chamber at the top to a
vacuum pump or to a domestic vacuum system via a vacuum hose or a fixed vacuum pipe.
When using a vacuum hose, we recommend using the BINDER VD connection kit (Art. no. 8012-1995)
(chap. 4.4.1). The pump module has an appropriate hose outlet at the back.
WARNING
Danger of health damage due to the release of extracted vapors.
Corrosion on the VD and pump. Damage to health.
Remove the extracted vapors from the pump module via a suitable hose into e.g., a
fume extractor facility.
Connect the hose to the vacuum pump outlet.
4.3.2 Pump module with pump stand (option)
The VAP 1 / VAP 2 pump stand is located in a separate transport packaging. With this option, the
mounted system, consisting of VD and pump module, has a total of two power supply leads.
The connection of the control line for switching on/off the vacuum pump via the pump module socket is
realized as 9-poles SUB-D socket “Pump module” (8) located in the VD rear control panel.
(17)
Loading ...
Loading ...
Loading ...