Candy CFU 050 E Freezers

User Manual - Page 38

For CFU 050 E.

PDF File Manual, 125 pages, Read Online | Download pdf file

CFU 050 E photo
Loading ...
Loading ...
Loading ...
32
INSTALLATION
Levelling the Unit
To do this adjust the two levelling feet at the
front of the unit.
If the unit is not level, the door and magnetic
seal alignments will not be covered properly.
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm
water using a 'wrung-out' sponge or cloth. Wash the shelf in warm soapy water and dry
completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information, refer to the Cleaning section.
Before Using Your Unit
Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.
Before Plugging in YOU MUST
Electrical connection
After shipping, place the appliance vertically and wait at least 2 - 3 hours before connecting it to the
electrical system. Before inserting the plug into the electrical socket, make sure that:
The socket is earthed and in compliance with the law.
The socket can withstand the maximum power load of the appliance, as indicated on the nameplate
of the refrigerator.
The power supply voltage is within the amounts indicated on the nameplate of the refrigerator.
The socket is compatible with the plug of the appliance. If not, request replacement of the plug by an
authorized technician; do not use extension cords and/or multiple connectors.
When the appliance is installed, the electrical cord and the current socket must be easily reached.
The cord must not be folded or compressed.
The cord must be checked regularly and replaced solely by authorized technicians.
The manufacturer declines any liability whenever these safety measures are not respected.
Check that you have a socket which is compatible with the plug supplied with the unit.
Before Turning On!
Do not turn on until two hours after moving the unit. The coolant fluid needs time to settle.
Loading ...
Loading ...
Loading ...