Loading ...
Loading ...
Loading ...
28 MAINTENANCE
Replacing the Water Filter
Replace the Water Filter :
•
Approximately every six months.
•
When the Replace Filter
icon turns on.
•
When the icemaker output decreases.
1
Remove the old water filter.
Push to open the water filter cover at the top right
of the refrigerator.
NOTE
•
Replacing the water lter causes a small amount of
water (around 1 oz. or 25 cc) to drain.
•
Wrap a cloth around the front end of the water lter
cover to collect any leaking water. Hold the water
lter upright, once it is removed, to prevent any
remaining water from spilling out of the water lter.
2
Put the cap on the water filter, then grasp and
rotate it counterclockwise to remove the water
filter from the filter head.
Cap
3
Replace with a new water filter.
Take the new water filter out of its packing and
remove the protective cover from the o-rings. Put
the cap on the new water filter, then push it into
the manifold hole until it stops.
4
Grasp and rotate cap clockwise until it stops.
Replace the cap to the side of the water filter.
5
After the water filter is replaced, dispense 2.5
gallons of water (flush for approximately 5
minutes) to remove trapped air and contaminants
from the system.
NOTE
•
Do not dispense the entire 2.5 gallon amount
continuously. Press and release the dispenser pad
for cycles of 30 seconds ON and 60 seconds OFF.
Loading ...
Loading ...
Loading ...