Loading ...
Loading ...
Loading ...
INSTRUMENTS AND CONTROLS
* Option/accessory.
89
Position Specification
The Active main beam (p. 92)*
function can be used.
Main beam can be activated when
dipped beam is switched on.
Main beam flash can be used.
Dipped beam, side marker lamps
rear and position lamps.
Main beam can be activated.
Main beam flash can be used.
A
Fitted in or under the front bumper.
B
Also at idle when the engine is running, provided that the knob
is moved to this position from another position.
Volvo recommends that mode is used
when the car is driven.
WARNING
The car's audio system is not able to deter-
mine when daylight is too weak or sufficiently
strong, e.g. in fog and rain, in all situations.
The driver is always responsible for ensuring
that the car is driven with a beam pattern suit-
able for the traffic situation and in accordance
with applicable traffic regulations.
Display and instrument lighting
Different display and instrument lighting is
switched on depending on key position; see Key
positions - functions at different levels (p. 81).
The display lighting is automatically subdued in
darkness - the sensitivity is set with the thumb-
wheel.
The intensity of the instrument lighting is
adjusted with the thumbwheel.
Headlamp levelling
The load in the car changes the vertical align-
ment of the headlamp beam, which could dazzle
oncoming motorists. Avoid this by adjusting the
height of the beam. Lower the beam if the car is
heavily laden.
1. Leave the engine running, or have the car's
electrical system in key position I.
2. Roll the thumbwheel up/down to raise/lower
beam alignment.
Thumbwheel positions for different load cases.
Only driver
Driver and passenger in the front passenger
seat
Occupants in all seats
Occupants in all seats and maximum load in
the cargo area
Driver and maximum load in the cargo area
Related information
•
Position lamps (p. 90)
•
Daytime running lights (p. 90)
•
Main/dipped beam (p. 91)
Loading ...
Loading ...
Loading ...