Loading ...
Loading ...
Loading ...
||
INSTRUMENTS AND CONTROLS
86
Lowering the rear seat backrest
IMPORTANT
When the backrest is to be folded, the rear
seat cup holder must not be open and there
must be no objects in the rear seat. Nor may
the seat belts be connected. Otherwise there
is a risk of damage to the rear seat uphols-
tery.
NOTE
The front seats may need to be pushed for-
wards, and/or the backrests adjusted
upwards, in order that the rear backrests can
be fully folded forward.
•
Both sections can be folded separately.
•
If the entire backrest is to be folded then the
different sections should be folded sepa-
rately.
If the right-hand section is being lowered -
release and adjust head restraint for the cen-
tre seat, see the earlier section "Head
restraint, centre seat, rear".
The outer head restraints are lowered auto-
matically when the backrests are lowered.
Pull up the backrest's locking handle
while folding the backrest forward at the
same time. A red indicator on the lock catch
shows that the backrest is no longer
locked in place.
NOTE
When the backrests have been lowered the
head restraints must be moved forward
slightly so as not to make contact with the
seat cushion.
Raising takes place in reverse order.
NOTE
When the backrest has been raised, the red
indicator should no longer be showing. If it is
still showing then the backrest is not locked
in place.
WARNING
Check that the backrests and head restraints
in the rear seat are locked properly after
being folded up.
Related information
•
Seats, front (p. 82)
•
Seats, front - electrically operated (p. 84)
Loading ...
Loading ...
Loading ...